[SOURCE CODE] 
Your computer has a disk larger than 512 MB. This version of Windows
includes improved support for large disks, resulting in more efficient
use of disk space on large drives, and allowing disks over 2 GB to be
formatted as a single drive.
IMPORTANT: If you enable large disk support and create any new drives on this
disk, you will not be able to access the new drive(s) using other operating
systems, including some versions of Windows 95 and Windows NT, as well as
earlier versions of Windows and MS-DOS. In addition, disk utilities that \
were not designed explicitly for the FAT32 file system will not be able
to work with this disk. If you need to access this disk with other operating
systems or older disk utilities, do not enable large drive support.
Do you wish to enable large disk support (Y/N)..............................? [Y]
 

[ SOURCE CODE ]
FDISK Options
Choose one of the following:
1. Create DOS partition or Logical DOS Drive
2. Set active partition
3. Delete partition or Logical DOS Drive
4. Display partition information
Enter choice: [1]

[ SOURCE CODE ]
Choose one of the following:
1. Create Primary DOS Partition
2. Create Extended DOS Partition
3. Create Logical DOS Drive(s) in the Extended DOS Partition
Enter choice: [1]

Do you wish to use the maximum available size for a Primary DOS Partition
(Y/N)................................................... [Y]

Enter partition size in Mbytes or percent of disk space (%) to
create a Primary DOS Partition.................................: [ 38% ]

Enter partition size in Mbytes or percent of disk space (%) to
create a Extended DOS Partition.................................: [ 100% ]

Enter logical drive size in Mbytes or percent of disk space (%)...[ 38%]

[ SOURCE CODE ]
Set Active Partition
Partition Status Type Volume Label Mbytes System Usage
C: 1 A PRI DOS AFGHANI 3153 FAT32 51%
2 EXT DOS 2996 49%
Total disk space is 6150 Mbytes (1 Mbyte = 1048576 bytes)
Enter the number of the partition you want to make active...........: [ 1]